XciteRC Xtide Micro RTR Operations Instructions download pdf (Page 20)

X-TIDE micro

RC functions

• IMPORTANT NOTE: The safety circuit of the X-Tide micro prevents starting the motor, as long as

the boat is not in the water. Therefore, do not be surprised that the boat does not respond to the remote

control „in the dry“! Once it is in the water, the remote control system is activated and the boat can be

controlled as desired.

• Check the motor and servo functions.

• If the drive battery runs low, the motor speed is reduced and the X-Tide micro starts slowing down. Navi-

gate to the shore of the water immediately. Charge the drive battery again.

RC functions

Forward - reverse

Move the throttle lever towards you, the X-Tide micro will move forward. Move the throttle stick back to

reverse.

Place the upper hull with the nose on the

front of the hull (1), then push back (2) and

secure with the lock (3).

Connect the battery. The connecting sys-

tem is polarized, do not use force.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

No comments

XciteRC Xtide Micro RTR Operations Instructions Page 20